The best way to care for your aluminum fence in the Panama City area is simple! Rinsing it with a garden hose every now and then is all the maintenance you should need for your aluminum fence. If debris, like grass or dirt, has built up, simply wipe it down with soapy water to look as good as new. Over time, some hardware around the gate may need a replacement, but other than that, your aluminum fence will practically take care of itself.

There's a lot to love about an aluminum fence - the sleek look, the maintenance-free luxury, and of course, the unsurpassed durability! The other thing most Panama City property owners love about this material is the aluminum fence lifespan, which is on average, about 20 years.

No, there are multiple height options for aluminum fencing ranging anywhere from 4' to 8' depending on the style and your preference. Give our office a call and our fence professionals can listen to what you're looking for and recommend some great options you will love.

Aluminum fencing can resemble wrought iron fences in style, but the main differences are that aluminum requires less maintenance and is often more economical for many property owners in Panama City, Florida.

If your fence line bends, the sections can easily be angled in the posts to follow most curves. For a very tight curve, just cut the sections in half and put another post between the two sections. The sections themselves can not be bent without ruining their structural integrity however.

Most of our standard aluminum fence sections can follow the contour of the ground. This is called either raking or racking. The fences drop about one foot over the 6' length of a section. If a greater slope is needed, sections can be specially fabricated as "double-punched sections" to traverse a 45 degree angle. Patriot Fence and Regency "Plus" styles can not rake at all, while Concord, Lexington, and 400 Series fence can only rake about 6 inches over their length.

For Ovation, Encore, Regency, and Patriot, the posts should be spaced 72" on-center. Industrial fence posts need a 71-1/2" spacing on-center, while residential fences have a 72-1/2" post spacing.

Our aluminum fence options come in either black or bronze for properties all across the Panama City, Florida area. Finials, ball caps and scrolls are also available in a gold finish, as well as black, white or bronze.

Speak to one of our knowledgeable fence pros today for all options you can choose from to meet your aluminum fencing needs. To view our aluminum fence brochure, contact our sales team or visit our yard location, to see samples in person.

Yes, but there are two conditions that must be met. We can only coat custom colors from October to March (our slow season) and the job must have at least 1,000 feet of fence. Also, since custom colors can not undergo the same testing that our standard colors have passed, we can only guarantee the finish for 5 years.

***Delgard & Ultra Aluminum have additional standard colors at no extra charge.

Yes, we have wall mount castings that allow the fence sections to connect to any flat surface. These fit over the ends of the rails and attach to the flat surface with two screws. We also have adjustable wall mounts if you need to come off the flat surface at an angle up to 45 degrees.

The distance between columns is the standard post spacing multiplied by the number of sections you want between the columns, less the width of one post. For example, for three Ovation sections between columns, 3 sections times 72" (the standard post spacing) minus 2" for the post, equals 214" (17'-10") between columns, not 18' as you might expect.

To fasten a post onto a concrete slab, we recommend that you core-drill the concrete if possible. We do offer deck mount castings; however, they should not be used on fences over 48" tall.

Yes, you can. Whether you want an entirely automatic gate or just the gate operator, they can be added to your fence project for installation in Florida. The best way to find out the exact options is to talk to one of our fence professionals for more details.

All sections & gates are shipped assembled. Certain styles require finials and/or loops to be installed in the field. We can send sections broken down for UPS shipping for an additional charge of $10.00 per section plus the normal UPS charges. Gates always ship by freight and cannot be broken down for field assembly.

Yes, aluminum fences can easily be safe for your pet, no matter what size. Aluminum fences can be installed with pickets that are closer together at the bottom, helping keep your animal safely inside your Panama City yard.

Self-closing and self-latching hardware are included in the gate prices, except for the Estate Gate prices which only include hinges. Gates over 60" wide are not guaranteed to self-close due to the size.

Our swing gates are sold by their opening size, so a 48" gate fits into a 48" opening between posts. The gates will hang flush with the face of the hinge post and latch onto the face of the opposite post.

Any two gates can be combined to make a double drive gate. When you need a double drive gate, notify our Customer Service Department and we will supply two drop rod assemblies at no charge. Double gates are also made to fit a given opening size, so a 12' double drive gate will fit inside a 12' opening.

For a single gate only, you will need to allow 1-1/2" extra to attach the latch keeper onto the column. (So, a 48" gate needs a 49-1/2" opening.) Let your Customer Service Representative know when you are ordering a gate for this type of installation, and they will supply you with a small piece of aluminum channel to attach the keeper to the middle of the column. For large industrial gates, you will have to cut off one side of the hinge to mount it on the column.

Special width and/or height gates are available. We need the exact opening size to fabricate the gate correctly. To calculate the cost for a special width gate, the price of the next widest standard gate and add $100 per leaf. Special height gates (up to 6' wide) are priced as the next tallest gate plus a $125 charge per leaf. These costs are cumulative, so a 59" wide x 45" tall gate would cost $225 more than a 60" x 48" gate.

Specially punched posts can be fabricated for an additional $20 per post. A sketch is required before these posts can be made. If you need a standard pattern on a longer or shorter post, there is only a $5 charge as long as the pattern begins at the top of the post (for example: a 58" post punched for 48" high fence).

To do this, you must order blank (unpunched) posts and attach the rails of the sections to them using the appropriate wall mounts.

We supply a small bottle of touch-up paint with most orders to cover minor nicks and damage that may occur in-transit at no charge. There are also cans of spray paint available for purchase. Do not use these air-dry paints to cover large areas because they will weather and fade at a different rate than our FenceCoat powder-coated finish. We do NOT guarantee these paints for this reason.

The maximum distance between columns is the standard post spacing times the number of sections between the columns minus the width of one post. For example, if you want to space your columns so that three Residential sections fit between the, take 3 times the post spacing of 72-1/2" minus one 2" post:(3 x 72.5") - 2" = 215.5" or 17' 11-1/2" between columns

For Industrial Strength fence this opening would need to be:
(3 x 71.5") - 2.5" = 212" or 17' 8" between columns

To fasten posts to a concrete slab, we always recommend that you core drill the concrete. If this is not feasible, then you may be able to use our deck mounts. These aluminum castings fit inside the bottom of a post and secure it. Since deck mounts fit inside posts, fence styles with bottom rails may not work properly since the rails will be in the way. You must supply four stainless steel bolts to attach the deck mount to the concrete itself. DO NOT USE DECK MOUNTS ON FENCES TALLER THAN 4' HIGH OR FOR GATE POSTS! THEY WILL FAIL!